One-year trial evaluating the durability and antimicrobial efficacy of copper in public transportation systems.

Surfaces on transit vehicles are frequently touched and could potentially act as reservoirs for micro-organism transmission. Regular cleaning and disinfection to minimize the spread of micro-organisms is operationally challenging due to the need to keep vehicles in circulation. The application of copper (Cu) alloys to high- touch surfaces could help reduce the risk of cross-contamination, however, little is known about the durability and efficacy of engineered copper surfaces after prolonged use. Three Cu products (decal, thermal fabrication, and alloy covers) were assessed over a 12-month period. These Cu products were randomly installed on 110 stanchions on three buses and four train (SkyTrain) cars in Vancouver and three buses, two subway cars, and two streetcars in Toronto with mirrored control surfaces directly opposite. Bacterial counts (Colony forming units, CFU) and ATP bioluminescence (ATPB) were measured every two months after peak morning routes. Durability of the Cu products were assessed monthly through visual inspection and colorimetry assays or by ex-situ microscopy. Cu products on stanchions reduced the mean colony forming units (CFU) of all vehicles by 42.7% in the mean CFU (0.573 (CI 95% 0.453-0.726), p-value < 0.001) compared to control surfaces. The three Cu products exhibited an overall 87.1% reduction in the mean ATPB readings (0.129 (CI 95% 0.059-0.285, p-value < 0.001) compared to controls. Surface Cu concentration for all three products was consistent throughout the 12-month period. Electron microscopy (SEM) and Energy-dispersive X-ray Spectroscopy (EDS) cross-sectional analysis showed no change in thickness or dealloying of Cu products, however SEM top-down analysis revealed substantial carbon accumulation on all surfaces. Cu products installed on transit vehicles maintained antimicrobial efficacy and durability after 12 months of use.

In vitro assessment of antibacterial and antiviral activity of three copper products after 200 rounds of simulated use.

Copper has well-documented antibacterial effects but few have evaluated it after prolonged use and against bacteria and viruses. Coupons from three copper formulations (solid, thermal coating, and decal applications) and carbon steel controls were subjected to 200 rounds simulated cleaning using a Wiperator™ and either an accelerated hydrogen peroxide, quaternary ammonium, or artificial sweat products. Antibacterial activity against S. aureus and P. aeruginosa was then evaluated using a modified Environmental Protection Agency protocol. Antiviral activity against coronavirus (229E) and norovirus (MNV-1) surrogates was assessed using the TCID50 method. Results were compared to untreated control coupons. One hour after inoculation, S. aureus exhibited a difference in log kill of 1.16 to 4.87 and P. aeruginosa a log kill difference of 3.39-5.23 (dependent upon copper product and disinfectant) compared to carbon steel. MNV-1 demonstrated an 87-99% reduction on each copper surfaces at 1 h and 99% reduction at 2 h compared to carbon steel. Similarly, coronavirus 229E exhibited a 97-99% reduction after 1 h and 90-99% after 2 h. Simulated use with artificial sweat did not hinder the antiviral nor the antibacterial activity of Cu surfaces. Self-sanitizing copper surfaces maintained antibacterial and antiviral activity after 200 rounds of simulated cleaning.

Effectiveness of prophylactic intranasal photodynamic disinfection therapy and chlorhexidine gluconate body wipes for surgical site infection prophylaxis in adult spine surgery.

BACKGROUND: Current measures to prevent spinal surgical site infection (SSI) lack compliance and lead to antimicrobial resistance. We aimed to examine the effectiveness of bundled preoperative intranasal photodynamic disinfection therapy (nPDT) and chlorhexidine gluconate (CHG) body wipes in the prophylaxis of spine SSIs in adults, as well as determine our institutional savings attributable to the use of this strategy and identify adverse events reported with nPDT-CHG. METHODS: We performed a 14-year prospective observational interrupted time-series study in adult (age > 18 yr) patients undergoing emergent or elective spine surgery with 3 time-specific cohorts: before rollout of our institution's nPDT-CHG program (2006-2010), during rollout (2011-2014) and after rollout (2015-2019). We used unadjusted bivariate analysis to test for temporal changes across patient and surgical variables, and segmented regression to estimate the effect of nPDT-CHG on the annual SSI incidence rates per period. We used 2 models to estimate the cost of nPDT-CHG to prevent 1 additional SSI per year and the annual cumulative cost savings through SSI prevention. RESULTS: Over the study period, 13 493 patients (mean 964 per year) underwent elective or emergent spine surgery. From 2006 to 2019, the mean age, mean Charlson Comorbidity Index (CCI) score and mean Spine Surgical Invasiveness Index (SSII) score increased from 48.4 to 58.1 years, from 1.7 to 2.6, and from 15.4 to 20.5, respectively (p < 0.001). Unadjusted analysis confirmed a significant decrease in the annual number (74.6 to 26.8) and incidence (7.98% to 2.67%) of SSIs with nPDT-CHG (p < 0.001). After adjustment for mean age, mean CCI score and mean SSII score, segmented regression showed an absolute reduction in the annual SSI incidence rate of 3.36% per year (p < 0.001). The estimated annual cost to prevent 1 additional SSI per year was about $1350-$1650, and the estimated annual cumulative cost savings were $2 484 856-$2 495 016. No adverse events were reported with nPDT-CHG. CONCLUSION: Preoperative nPDT-CHG administration is an effective prophylactic strategy for spinal SSIs, with significant cost savings. Given its rapid action, minimal risk of antimicrobial resistance, broad-spectrum activity and high compliance rate, preoperative nPDT-CHG decolonization should be the standard of care for all patients undergoing emergent or elective spine surgery.

In search of COVID-19: The ability of biodetection canines to detect COVID-19 odours from clinical samples.

BACKGROUND: COVID-19 continues to be a public health concern and the demand for fast and reliable screening tests remains. SARS-CoV-2 infection in humans generates a specific volatile organic compound signature; this 'volatilome' could be used to deploy highly trained canine scent detection teams if they could reliably detect odours from infected individuals. METHODS: Two dogs were trained over 19 weeks to discriminate between the odours produced by breath, sweat, and gargle specimens collected from SARS-CoV-2 infected and uninfected individuals. Third party validation was conducted in a randomized double-blinded controlled manner using fresh odours obtained from different patients within 10 days of their first positive SARS-CoV-2 molecular result. RESULTS: Cumulatively, the dogs completed 299 training sessions on odours from 108 unique participants. Validation was conducted over 2 days with 120 new odours. Twenty-four were odours collected from SARS-CoV-2 positive individuals (8 gargle, 8 sweat, and 8 breath); 21 were from SARS-CoV-2 negative individuals (5 gargle, 8 sweat, and 8 breath) and the remaining 75 were odours that the dogs could have associated with the target odour during training. The dogs were able to identify odours from positive specimens with an overall sensitivity of 100% and a specificity of 87.5%. Considering a community prevalence of 10%, the combined negative predictive value of the dogs was 100% and the positive predictive value was 47.1%. CONCLUSIONS: Multiple dogs can be trained to accurately detect SARS-CoV-2 positive individuals. Future research is required to determine how and when canine scent detection teams should be deployed.

HISTORIQUE: La COVID-19 continue d'être une préoccupation sanitaire, et la demande de tests de dépistage rapides et fiables se maintient. L'infection par le SRAS-CoV-2 chez les humains produit une signature composée organique volatile bien précise. Ce « volatilome ¼ pourrait être utilisé pour déployer des équipes canines hautement formées et spécialisées dans la détection des odeurs afin d'établir si elles peuvent détecter les odeurs des personnes infectées avec fiabilité. MÉTHODOLOGIE: Deux chiens ont été formés pendant 19 semaines pour distinguer les odeurs émanantes des échantillons d'haleine, de sueur et de gargarisme prélevés chez des personnes infectées et non infectées par le SRAS-CoV-2. Les chercheurs ont effectué une validation par des tiers dans le cadre d'une étude contrôlée randomisée à double insu au moyen d'odeurs fraîches obtenues auprès de divers patients dans les dix jours suivant le premier résultat moléculaire positif au SRAS-CoV-2. RÉSULTATS: Dans l'ensemble, les chiens ont effectué 299 séances de formation sur les odeurs de 108 participants uniques. La validation a eu lieu sur deux jours à partir de 120 nouvelles odeurs. Ainsi, 24 odeurs provenaient de personnes positives au SRAS-CoV-2 (8 échantillons de gargarisme, 8 de sueur et 8 d'haleine); 21 provenaient de personnes négatives au SRAS-CoV-2 (5 échantillons de gargarisme, 8 de sueur et 8 d'haleine) et les 75 autres étaient des odeurs que les chiens avaient pu associer à l'odeur cible pendant la formation. Les chiens ont été en mesure de dépister les odeurs des échantillons positifs selon une sensibilité globale de 100 % et une spécificité de 87,5 %. Étant donné une prévalence communautaire de 10 %, la valeur prédictive négative combinée des chiens s'élevait à 100 % et la valeur prédictive positive, à 47,1 %. CONCLUSIONS: De nombreux chiens peuvent être formés pour dépister avec exactitude les personnes positives au SRAS-CoV-2. De futures recherches devront être réalisées pour déterminer quand et comment déployer ces équipes canines spécialisées en biodétection.

Surface and Air Contamination With Severe Acute Respiratory Syndrome Coronavirus 2 From Hospitalized Coronavirus Disease 2019 Patients in Toronto, Canada, March-May 2020.

BACKGROUND: We determined the burden of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in air and on surfaces in rooms of patients hospitalized with coronavirus disease 2019 (COVID-19) and investigated patient characteristics associated with SARS-CoV-2 environmental contamination. METHODS: Nasopharyngeal swabs, surface, and air samples were collected from the rooms of 78 inpatients with COVID-19 at 6 acute care hospitals in Toronto from March to May 2020. Samples were tested for SARS-CoV-2 ribonucleic acid (RNA), cultured to determine potential infectivity, and whole viral genomes were sequenced. Association between patient factors and detection of SARS-CoV-2 RNA in surface samples were investigated. RESULTS: Severe acute respiratory syndrome coronavirus 2 RNA was detected from surfaces (125 of 474 samples; 42 of 78 patients) and air (3 of 146 samples; 3 of 45 patients); 17% (6 of 36) of surface samples from 3 patients yielded viable virus. Viral sequences from nasopharyngeal and surface samples clustered by patient. Multivariable analysis indicated hypoxia at admission, polymerase chain reaction-positive nasopharyngeal swab (cycle threshold of ≤30) on or after surface sampling date, higher Charlson comorbidity score, and shorter time from onset of illness to sampling date were significantly associated with detection of SARS-CoV-2 RNA in surface samples. CONCLUSIONS: The infrequent recovery of infectious SARS-CoV-2 virus from the environment suggests that the risk to healthcare workers from air and near-patient surfaces in acute care hospital wards is likely limited.

Antimicrobial efficacy and durability of copper formulations over one year of hospital use.

OBJECTIVE: To evaluate 3 formulations of copper (Cu)-based self-sanitizing surfaces for antimicrobial efficacy and durability over 1 year in inpatient clinical areas and laboratories. DESIGN: Randomized control trial. SETTING: We assessed 3 copper formulations: (1) solid alloy 80% Cu-20% Ni (integral copper), (2) spray-on 80% Cu-20% Ni (spray-on) and (3) 16% composite copper-impregnated surface (CIS). In total, 480 coupons (1 cm2) of the 3 products and control surgical grade (AISI 316) stainless steel were inserted into gaskets and affixed to clinical carts used in patient care areas (including emergency and maternity units) and on microbiology laboratory bench work spaces (n = 240). The microbial burden and assessment of resistance to wear, corrosion, and material compatibility were determined every 3 months. Participants included 3 tertiary-care Canadian adult hospital and 1 pediatric-maternity hospital. RESULTS: Copper formulations used on inpatient units statistically significantly reduced bacterial bioburden compared to stainless steel at months 3 and 6. Only the integral copper product had significantly less bacteria than stainless steel at month 12. No statistically significant differences were detected in microbial burden between copper formulations and stainless-steel coupons on microbiology laboratory benches where bacterial counts were low overall. All mass changes and corrosion rates of the formulations were acceptable by engineering standards. CONCLUSIONS: Copper surfaces vary in their antimicrobial efficacy after 1 year of hospital use. Frequency of cleaning and disinfection influence the impact of copper; the greatest reduction in microbial bioburden occurred in clinical areas compared to the microbiology laboratory where cleaning and disinfection were performed multiple times daily.

Environmental detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) from medical equipment in long-term care facilities undergoing COVID-19 outbreaks.

Environmental sampling was conducted at long-term care facilities to determine the extent of surface contamination with severe acute respiratory syndrome coronavirus 2 virus. Medical equipment used throughout the facility was determined to be contaminated.

Influence of probiotics on biofilm formation and diversity of bacteria colonising crop sorghum ensiled with unsalable vegetables.

The objective of this study was to characterise in situ digestion kinetics and bacterial colonisation of crop sorghum ensiled with unsalable carrot or pumpkin at 0, 20 or 40% dry matter (DM). Silages with or without the application of a commercial probiotic were incubated in situ for 0, 3, 6, 9, 24 and 48 h. Calculation of in situ digestion kinetics was conducted for DM, organic matter and neutral detergent fibre (aNDF). The V4 region of the 16S rRNA gene was sequenced to determine the composition and diversity of bacteria colonising the silage. Organic matter and DM digestion kinetics indicated that greater vegetable inclusion increased (P < 0.05) the soluble fraction and effective degradability. Bacterial richness at 48 h incubation was greater (P = 0.02) in 20% carrot and 40% pumpkin treatments, compared with the control. An effect of level × probiotic was observed with increased Shannon diversity (P = 0.01) for 40% carrot and 20% pumpkin probiotic treatments, respectively. Primary colonising bacteria were members of the Prevotella genus, dominating after 3 and 6 h of incubation. The abundance of Prevotella increased by 4.1% at 3 h (P < 0.01) and by 4.7% at 9 h incubation with probiotics, compared with the control. Secondary biofilm colonisers included members of Treponema, Saccharofermentans, Fibrobacter, Ruminobacter and Anaerosporobacter genera, dominant from 9 h incubation onward. This study demonstrated that including unsalable vegetables at 20 or 40% DM increases the soluble fraction and effective degradability of sorghum silage during in situ digestion and increases diversity of bacteria colonising ensiled vegetables within the rumen. KEY POINTS: • Ensiling unsalable vegetables is a viable strategy to reduce food waste. • Ensiled vegetables increased in situ soluble fraction and effective degradability. • Bacterial richness at 48 h incubation improved with 20% carrot or 40% pumpkin. • Diversity of colonising rumen bacteria increased with carrot or pumpkin inclusion.

In vitro evaluation of antimicrobial efficacy and durability of three copper surfaces used in healthcare.

Antimicrobial properties of solid copper (Cu) surfaces against various microorganisms have been demonstrated, but little is known about the durability and relative antimicrobial efficacy of different Cu formulations currently used in healthcare. The aim of this study was to assess whether three different formulations of copper-bearing alloys (integral, spray-on and Cu-impregnated surfaces) and a stainless steel control differed in their antimicrobial efficacy, durability, and compatibility with hospital-grade cleaner/disinfectants. The U.S. Environmental Protection Agency draft protocol for the evaluation of bactericidal activity of Cu containing alloys was modified to more accurately reflect cleaning methods in healthcare. The three different Cu alloys were evaluated using 25 × 25 × 3 mm disks subjected to one year of simulated cleaning and disinfection using the Wiperator™ with microfiber cloths presoaked in three common hospital disinfectants: accelerated hydrogen peroxide, quaternary ammonium, or sodium hypochlorite solutions. Bactericidal activity was evaluated using Staphylococcus aureus and Pseudomonas aeruginosa. While all Cu formulations exhibited some antimicrobial activity, integral and spray-on Cu alloys showed the greatest efficacy. Assessments of durability included documentation of changes in mass, morphological changes by scanning electron microscopy, chemical composition alteration by energy-dispersive x-ray spectroscopy, and surface roughness alteration using profilometry over one year of simulated use. The integral Cu alloy had the least mass loss (0.20% and 0.19%) and abrasion-corrosion rate (6.28 and 6.09 µm/yr) compared to stainless steel. The integral product also showed the highest durability. Exposure to disinfectants affected both the antimicrobial efficacy and durability of the various copper products.

Potential influence of rapid diagnostics on timeliness of management decisions for patients with positive blood cultures.

Background: The Accelerate Pheno system (AXDX) provides rapid identification (ID; 90 minutes) and antimicrobial susceptibility testing (AST; approximately 7 hours) from positive blood culture (BC) bottles. We assessed the potential of AXDX results to influence more timely antibiotic interventions with a convenience sample of 158 positive BCs. Methods: BCs with a mono-microbial Gram stain likely to be on the AXDX panel were run in parallel with the standard of care (SOC). Using results from the SOC, the medical microbiologist on call (MMOC) noted interventions made at the time of BC Gram stain and when ID and AST results were available. The timing of MMOC intervention was noted and compared with fastest potential SOC time and AXDX time. Results: Of 158 specimens selected for analysis, 144 were evaluable. ID was available 11.9 hours and AST 27.7 hours faster than SOC. Correct ID was provided for 85.2% of specimens and AST for 59.0% of specimens, with 97.5% essential agreement compared with the SOC. One hundred and thirteen clinical interventions were made on 100 specimens: 54.9% were narrowing; 33.6%, escalation; 6.2%, consultation with ID; and 3.5%, further investigation. If AXDX data had been used immediately once available, interventions would have been possible 24 hours earlier for ID interventions and 39 hours earlier for AST results. Conclusions: Results from rapid diagnostic panels such as AXDX have the potential to support timely antimicrobial de-escalation and other decisions to benefit patients, especially if paired with stewardship interventions.

Historique: Le système Accelerate Pheno (AXDX) permet de procéder à une identification rapide (ID; 90 minutes) et à des tests de susceptibilité antimicrobienne (AST; environ sept heures) à partir de bouteilles d'hémoculture (BH) positives. À l'aide d'un échantillon de commodité de 158 BH positives, les auteurs ont évalué le potentiel de résultats du système AXDX pour favoriser des interventions antibiotiques plus opportunes. Méthodologie: Les auteurs ont comparé les BH présentant une coloration de Gram monomicrobienne susceptible de se trouver sur le panel AXDX avec la norme de soins (NdS). À l'aide des résultats de la NdS, le microbiologiste médical sur appel (MMSA) a consigné les interventions effectuées au moment de la coloration de Gram de la BH et lorsque les résultats de l'ID et de l'AST étaient disponibles. Le moment de l'intervention du MMSA était consigné et comparé avec la durée de la NdS au potentiel le plus rapide et la durée de l'AXDX. Résultats: Des 158 échantillons sélectionnés en vue d'être analysés, 144 étaient évaluables. L'ID était disponible 11,9 heures et l'AST, 27,7 heures plus rapidement que la NdS. L'ID exacte était fournie pour 85,2 % des échantillons et l'AST exacte, pour 59,0 % des échantillons, selon une entente essentielle de 97,5 % par rapport à la NdS. Cent treize interventions ont été effectuées sur 100 échantillons : 54,9 % visaient à réduire le spectre, 33,6 %, à accroître la médication, 6,2 %, à demander une consultation avec l'ID et 3,5 %, à obtenir des explorations plus approfondies. Si les données de l'AXDX avaient été utilisées dès l'obtention des résultats, il aurait été possible d'agir 24 heures plus rapidement pour les interventions d'ID et 39 heures plus rapidement pour les résultats de l'AST. Conclusions: Les résultats des panels diagnostiques rapides comme l'AXDX ont le potentiel de favoriser une désescalade antimicrobienne et d'autres décisions au profit des patients, surtout s'ils s'associent à des interventions de gestion.

FilmArray respiratory panel assay: An effective method for detecting viral and atypical bacterial pathogens in bronchoscopy specimens.

The BioFire FilmArray Respiratory Panel (FA RP) is a rapid multiplexed molecular assay approved for detection of viral and atypical bacterial pathogens in nasopharyngeal specimens. This study aimed to evaluate the performance of the BioFire FilmArray Respiratory Panel v1.7 on bronchoscopy specimens. We tested 133 bronchial specimens (87 archived and 46 prospectively collected) with the FA RP and compared the results to the Luminex NxTAG Respiratory Pathogen Panel (NxTAG RPP). After discordant analysis, 123 specimens gave concordant results using the FA RP and the NxTAG RPP for an overall agreement of 93.9% (kappa = 0.88 [95% CI 0.80-0.96]), a positive percent agreement of 93.7% (95% CI 83.7-97.7) and a negative percent agreement of 94.1% (95% CI 84.9-98.1). In conclusion, the BioFire FilmArray RP performed reliably to detect a broad range of respiratory pathogens in bronchoscopy specimens.

Bioaerosols and Transmission, a Diverse and Growing Community of Practice.

The transmission of infectious microbes via bioaerosols is of significant concern for both human and animal health. However, gaps in our understanding of respiratory pathogen transmission and methodological heterogeneity persist. New developments have enabled progress in this domain, and one of the major turning points has been the recognition that cross-disciplinary collaborations across spheres of human and animal health, microbiology, biophysics, engineering, aerobiology, infection control, public health, occupational health, and industrial hygiene are essential. Collaborative initiatives support advances in topics such as bioaerosol behavior, dispersion models, risk assessment, risk/exposure effects, and mitigation strategies in clinical, experimental, agricultural, and other field settings. There is a need to enhance the knowledge translation for researchers, stakeholders, and private partners to support a growing network of individuals and agencies to achieve common goals to mitigate inter- and intra-species pathogen transmission via bioaerosols.

Burkholderia cepacia: An Outbreak in the Peritoneal Dialysis Unit.

Burkholderia cepacia is a ubiquitous, opportunistic, environmental gram-negative bacillus which most commonly affects cystic fibrosis and immunocompromised patients. Rarely, it can cause peritoneal dialysis (PD) exit-site infection (ESI). Information relating to predisposing factors, clinical course, and treatment options for B. cepacia ESIs is limited. Although reports of B. cepacia healthcare-associated infections exist, outbreaks in PD units have not previously been reported. A recent outbreak of B. cepacia ESI in our PD unit provided a unique opportunity to study B. cepacia ESIs and to outline an approach to investigating such an outbreak.After unexpectedly identifying B. cepacia as the cause of PD catheter ESIs in 3 patients over an 11-week period, we began systematically screening our PD population for B. cepacia exit-site colonization. A further 6 patients were found to be affected, 3 with asymptomatic colonization and 3 with symptomatic B. cepacia ESI. Four of the 6 developed tunnel infections requiring multiple courses of antibiotic treatment, and 3 patients required catheter removal; 2 patients with symptomatic ESIs without tunnel involvement responded to oral and topical antibiotics. Further investigation implicated 4% chlorhexidine aqueous bodywash used by all patients as the probable source of the outbreak.This is the first reported outbreak of B. cepacia ESIs. We noted an association between diabetes mellitus and refractory/more extensive infection. Our experience suggests that isolated ESIs can be treated successfully with oral antibiotics whereas tunnel infections generally require catheter removal.

Results from the Canadian Nosocomial Infection Surveillance Program for detection of carbapenemase-producing Acinetobacter spp. in Canadian hospitals, 2010-16.

Objectives: Globally there is an increased prevalence of carbapenem-resistant Acinetobacter spp. (CRAs) and carbapenemase-producing Acinetobacter spp. (CPAs) in the hospital setting. This increase prompted the Canadian Nosocomial Infection Surveillance Program (CNISP) to conduct surveillance of CRA colonizations and infections identified from patients in CNISP-participating hospitals between 2010 and 2016. Methods: Participating acute care facilities across Canada submitted CRAs from 1 January 2010 to 31 December 2016. Patient data were collected from medical records using a standardized questionnaire. WGS was conducted on all CRAs and data underwent single nucleotide variant analysis, resistance gene detection and MLST. Results: The 7 year incidence rate of CRA was 0.02 per 10 000 patient days and 0.015 per 1000 admissions, with no significant increase observed over the surveillance period (P > 0.73). Ninety-four CRA isolates were collected from 58 hospitals, of which 93 (98.9%) were CPA. Carbapenemase OXA-235 group (48.4%) was the most common due to two separate clusters, followed by the OXA-23 group (41.9%). Patients with a travel history were associated with 38.8% of CRA cases. The all-cause 30 day mortality rate for infected cases was 24.4 per 100 CRA cases. Colistin was the most active antimicrobial agent (95.8% susceptibility). Conclusions: CRA remains uncommon in Canadian hospitals and the incidence did not increase from 2010 to 2016. Almost half of the cases were from two clusters harbouring OXA-235-group enzymes. Previous medical treatment during travel outside of Canada was common.

Strengthening Human Immunodeficiency Virus and Tuberculosis Prevention Capacity among South African Healthcare Workers: A Mixed Methods Study of a Collaborative Occupational Health Program.

BACKGROUND: Insufficient training in infection control and occupational health among healthcare workers (HCWs) in countries with high human immunodeficiency virus (HIV) and tuberculosis (TB) burdens requires attention. We examined the effectiveness of a 1-year Certificate Program in Occupational Health and Infection Control conducted in Free State Province, South Africa in an international partnership to empower HCWs to become change agents to promote workplace-based HIV and TB prevention. METHODS: Questionnaires assessing reactions to the program and Knowledge, Attitudes, Skills, and Practices were collected pre-, mid-, and postprogram. Individual interviews, group project evaluations, and participant observation were also conducted. Quantitative data were analyzed using Wilcoxon signed-rank test. Qualitative data were thematically coded and analyzed using the Kirkpatrick framework. RESULTS: Participants recruited (n = 32) were mostly female (81%) and nurses (56%). Pre-to-post-program mean scores improved in knowledge (+12%, p = 0.002) and skills/practices (+14%, p = 0.002). Pre-program attitude scores were high but did not change. Participants felt empowered and demonstrated attitudinal improvements regarding HIV, TB, infection control, and occupational health. Successful projects were indeed implemented. However, participants encountered considerable difficulties in trying to sustain improvement, due largely to lack of pre-existing knowledge and experience, combined with inadequate staffing and insufficient management support. CONCLUSION: Training is essential to strengthen HCWs' occupational health and infection control knowledge, attitudes, skills, and practices, and workplace-based training programs such as this can yield impressive results. However, the considerable mentorship resources required for such programs and the substantial infrastructural supports needed for implementation and sustainability of improvements in settings without pre-existing experience in such endeavors should not be underestimated.

Performance assessment of urine flow cytometry (UFC) to screen urines to reflex to culture in immunocompetent and immunosuppressed hosts.

PURPOSE: Urine flow cytometry (UFC) is an automated method to quantify bacterial and white blood cell (WBC) counts. We aimed to determine whether a threshold for these parameters can be set to use UFC as a sensitive screen to predict which urine samples will subsequently grow in culture. METHODOLOGY: Urines submitted to our microbiology laboratory at a tertiary care centre from 22 July 2015-17 February 2016 underwent UFC (Sysmex UF-1000i) analysis, regular urinalysis and urine culture. Positive urine cultures were defined as growth ≥104 c.f.u. ml-1 of organisms associated with urinary tract infections. The correlation of UFC bacterial and WBC counts with urine culture was assessed using receiver operating characteristics curves. The sensitivity (SN), specificity (SP), negative predictive values (NPVs), positive predictive values (PPVs) and false negative rate (FNR) were calculated at various thresholds in immunocompetent and immunosuppressed patients. RESULTS: A total of 15 046 urine specimens were submitted, of which 14 908 were analysable in the study. The average time to UFC result from receipt in the laboratory was 0.76 h (+/-1.04). The test performance at a set threshold of UFC bacteria ≥20 or WBC >5 was: SN=96.0 %, SP=39.2 %, PPV=47.0 %, NPV=94.5 % and FNR=4.0 %. This threshold eliminates 26 % of urine cultures. Immunosuppressed hosts had a lower sensitivity of 90.6 % and a higher FNR of 9.4 %. CONCLUSIONS: UFC is a rapid and sensitive method to screen out urine samples that will subsequently be negative and to reflex urines to culture that will subsequently grow. UFC results are available within 1 h from receipt and enable the elimination of culture when the set threshold is not met.

The neglected burden of tuberculosis disease among health workers: a decade-long cohort study in South Africa.

BACKGROUND: Health workers (HWs) in resource-limited settings are at high-risk of exposure to tuberculosis (TB) at work. The aim of this study was to estimate the rate of TB disease among HWs in the Free State Province of South Africa between 2002 and 2012 and to compare demographic and clinical characteristics between HWs and the general population with TB. This study also explores the effect of occupational variables on risk of TB among HWs. METHODS: Probabilistic record linkage was utilized to identify HWs who were also registered as TB patients. This historical prospective cohort study calculated incidence rate ratios (IRR) for TB disease among HWs in Free State from 2002 to 2012. Generalized linear mixed-effects regression was used to model the association between sex, race, facility type, occupation, duration of employment, and the rate of TB. RESULTS: There were 2677 cases of TB diagnosed among HWs from 2002 to 2012 and 1280 cases were expected. The overall TB incidence rate in HWs during the study period was 1496·32 per 100,000 compared to an incidence rate of 719·37 per 100,000 in the general population during the same time period. IRR ranged from 1·14 in 2012 to 3·12 in 2005. HWs who were male, black, coloured and employed less than 20 years had higher risk of TB. Facility type and occupation were not associated with increased risk of TB when adjusted for other covariates. CONCLUSION: HWs in South Africa have higher rates of TB than the general population. Improved infection prevention and control measures are necessary in all high-burden TB healthcare settings.

A model for choosing an automated ultraviolet-C disinfection system and building a case for the C-suite: Two case reports.

Environmental disinfection has become the new frontier in the ongoing battle to reduce the risk of health care-associated infections. Evidence demonstrating the persistent contamination of environmental surfaces despite traditional cleaning and disinfection methods has led to the widespread acceptance that there is both a need for reassessing traditional cleaning protocols and for using secondary disinfection technologies. Ultraviolet-C (UV-C) disinfection is one type of no-touch technology shown to be a successful adjunct to manual cleaning in reducing environmental bioburden. The dilemma for the infection preventionist, however, is how to choose the system best suited for their facility among the many UV-C surface disinfection delivery systems available and how to build a case for acquisition to present to the hospital administration/C-suite. This article proposes an approach to these dilemmas based in part on the experience of 2 health care networks.